Welding Powder

Features :

• Superior electrical conductivity to the conductors themselves.
• Does not corrode, oxidize or degrade with time and is resistant to galvanic coupling.
• Able to withstand repeated electrical discharges.
• Never increases its resistance.
• Has greater mechanical and squeezing resistance than the conductors themselves.
• It has Superior electrical conductivity to the conductors themselves.
• It does not corrode, oxidize or degrade with time and is resistant to galvanic coupling.
• It is able to withstand repeated electrical discharges.
• It never increases its resistance.
• It has greater mechanical and squeezing resistance than the conductors themselves.
• It Offers a permanent weld and a low resistance connection, essential for achieving long wearing and trustworthy results in earthing.
• It Guarantees the most common connections not only between copper cables but also for welding tapes and metallic pieces made of brass, stainless steel, and copper coated steel earth rods.

Ignite Powder is also known as Starting Powder and is required and is must. Sprinkle little Starting Powder on the Mould followed by the Exothermic Weld Powder and again sprinkle it little on the Top Side of Mould. Than Ignite starting powder with a spark gun.
This results in exothermic reaction and the Weld Powder melts to molten copper alloy. The molten copper alloy melts the retaining disc and flows into the Welding cavity where it partially melts the conductors.

Ignite Powder of 2-4 grams is sufficient

Features :

• Superior electrical conductivity to the conductors themselves.
• Does not corrode, oxidize or degrade with time and is resistant to galvanic coupling.
• Able to withstand repeated electrical discharges.
• Never increases its resistance.
• Has greater mechanical and squeezing resistance than the conductors themselves.