Clamps and Fittings

BI - Metallic Connector / Bi metal Connectors

We manufacture and export Copper Aluminium Bimetallic Connector. Our range of Cable Lugs and Terminal Ends also includes Bi metallic Connectors. These are made of Aluminium and Copper.
This are used for joining aluminium and copper circular conductors particularly when copper is used as earthing in aluminium lightning protection systems.
Bi- Metallic connectors are used for joining aluminium & copper circular conductors. They are particularly useful, when copper is used as earthing in aluminium lightning protection systems.
CONDUCTIVE MATERIAL -
Aluminium Barrel : 99.6%
Copper Palm : 99.95%
Final Metal State : Fully Annealed, Including Joint.
Joining method friction welding, welding area more than nominal conductor area.
Finish natural.

Manufacturer of Cross Clamps

These four-way connectors are suitable for making cross, straight through or tee joints in stranded copper conductor.

Type - HOT DIP GALVANISED STEEL 
HDG Steel Cross Clamp equipped with 4 Galvanised Screws & Nuts M8 x 25, suitable to connect-
A) 8 mm or 10 mm Round Bars
B) Galvanised Plates with maximum width of 30 mm.

- Cross Clamp also available to connect Galv. Plate with 40 mm width.
- Cross Clamp also available in size 60 x 60 x 3 / 60 x 60 x 4.
- Cross Clamp also available of Stainless Steel on special request

Coupler / Couplers for Coppper Bonded Rod

 

Amiable Impex are Manufacturer, Exporter, Supplier and Wholesaler of Couplers of Copper Bonded Rod as seen below.
This coupler can be made from Brass as well as Gunmetal. Kindly select the clamps and let us know your requirement and we will quote you accordingly.

We Can Manufacturer Also
1- Brass Coupler For Copper Bonded Rod
2- Gunmetal Coupler for Copper Bonded Rod
3- Plain Brass Coupler for Copper Bonded Rod

Manufacturer of Dc tape clip / Dc tape clamp

We manufacture and export Dc tape clip. Our range of Earthing Lightning Protection also Dc tape clips / Dc tape clamps. These are made of Brass or Gunmetal..These are used with Bare Copper Tape Conductor. Used to secure Tape to structure.
Material - Gunmetal / Brass

Manufacturer of Earth Bond Tapes and Clamps Earth Bonding Clamps and Tape

Electrical bonding is the practice of intentionally electrically connecting all exposed metallic noncurrent items in a room or building as protection from electric shock. If a failure of electrical insulation occurs, all bonded metal objects in the room will have substantially the same electrical potential, so that an person of the room cannot touch two objects with significantly different potentials. Even if the connection to a distant earth/ground is lost, the person will be protected from dangerous potential differences.

In a building with electricity it is normal for safety reasons to connect all metal objects such as pipes together to the mains earth to form an Equipotential zone. This is done in the developed countries like U.S.A, U.K etc because many buildings are supplied with a single phase supply cable where the neutral and earth conductors are combined. Close to the electricity meter this conductor is divided into two, the earth terminal and the wire going to the neutral bus bar in the consumer unit. In the event of a break in a neutral connection this earth terminal provided by the supply company will be at a potential (relative to the true earth) which is the same as the live wire coming to the home.

Manufacturer of Heavy duty cast cable saddle / Heavy Duty Cable Saddle

Material - Gunmetal / Brass
These are used with 8 mm conductor or for supporting Air Terminals when used in conjuction with wall mounted Air Terminal base.We Manufacture Heavy duty cast cable saddles made from Gunmetal and Brass. We also export all kind of Heavy Duty Cast Cable Saddle, which are mainly used for the fixing of the copper cable

Manufacturer of Rod to A type Tape Clamp

Rod To Tape Clamp - A Type
Corrosion resistance, conductivity and mechanical strength are essential considerations in clamp design to ensure an earthing system remains operative for many years.

Manufacturer of Square Tape Clamps

We manufacture and export Square tape clamp / Square tape clips. Our range of Earthing Lightning Protection also include Square tape clamp. These clamps are made of Brass / Gunmetal. These are suitable for 4 Way Connections, Straight, Through or Tee Joints for Copper Tape.
Material - Gunmetal / Brass

Manufacturer of Water Pipe clamp / Waterpipe clamps

We manufacture and export Water pipe clamp. Our range of Earthing Lightning Protection also includes Water pipe.Water pipe clamp are Ideal for connecting copper conductors to metallic water pipe (including copper tubing) or ground rods. Its Applications include lightning protection, fault current ground, signal reference grid and static ground.

It fits hex fittings, copper grounding conductors, galvanized water pipes, copper water tubing or copper ground rods ranging from 1/2" to 4"
Size: 1/2” 3/4” 1"

Material: Brass / Copper

Application: Available in round and hexagonal shapes in length of 50, 60 and 70 mm